Conveyor System Accessories

Hytrol Conveyor System Accessories are listed in categories, “Conveyor Accessories”, “System Accessories” and “EZ-Logic Components”. This page lists Hytrol EZ-Logic Components.
To see other Hytrol Conveyor System Accessories click Click on an image for more information….

Conveyor Accessories
.

Conveyor System Accessories

See Below …

EZ-Logic Components
.

Hytrol Conveyor System Accessories:

Skatewheel Y-Switch
Skatewheel Spur Curve Switch
Hytrol Traffic Cop

Y Switch provides simple method of diverting or converging products from one line to another. Normal flow is to left curve looking from handle end. Transfer mechanism is raised to transfer products to other curve. Unit mounts on three stationary supports. Furnished with manual or pneumatic controls. Guard rails can be supplied-optional.

4 Widths
Hand or Air Operated
45 and 90 degree Curves Available

Y Switches / Traffic Cop

Light Duty Pusher / High Speed Pusher / Overhead Pull Off

Hytrols LD Pusher is a light duty pusher designed to easily mount to the side on many conveyor models. The LD Pusher provides an economical solution for pushing lightweight products off at a right angle to product flow. Ideally used for reject or inspection stations. The LD Pusher is not designed for high cycle applications.

7″, 10″, or 15″ Stroke (Specify)
Aluminum Pusher Face
15 lb. Maximum Carton Weight
Mounting Hardware (Specify Conveyor Model & Overall Width)
Less Electrical Controls Required to Actuate Pusher

Hytrol Light Duty Pusher

Hytrol Diverters, Powered Pivot Diverters

The Powered Pivot Diverter is designed for use with Models 138-ACC & 190-ACC Accumulating Conveyor. Products are automatically diverted onto adjacent 30 degree spur lines.

Powered Pivot Diverter

Hytrol O-Ring Transfer

O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air bag actuator lifts the transfer mechanism while powered O-Rings transfer the product. Linear bearings are used to guide transfer as it is raised and lowered. Can be used with Models 138 and 190-NSP/NSPEZ line shaft conveyors.

O-Ring Transfers

Hytrol Reversing O-Ring Transfer / CT-200

Reversing O-Ring Transfers are used to move products at right angles to adjacent or parallel conveyor lines. An air bag actuator lifts the transfer mechanism while powered O-Rings transfer the product. Linear bearings are useed to guide transfer as it is raised and lowered. Air cylinders operate reversing mechansism to reverse transfer flow. Can be used with Models 138 and 190 NSP/NSPEZ line shaft conveyors.

Reversing O-Ring Transfers

Hytrol Chain Transfers

Chain Transfers are used to move products at right angles to adjacent or parallel conveyor lines. Air bags lift the transfer mechanism while powered chains transfer the product. Two or three strands of chain are available in either between rail (BR), conveyor to conveyor (CC), or Extended types. Chains run on UHMW polyethylene wearstrips to reduce friction. Can be used with Models 25-CRR, 26-CRR or 2511-CRA and 2511-CREZ chain driven roller conveyors.